Enabling HDMI port in ASUS k571GT INTEL UHD 630

promisedSavior

New member
Joined
Jun 9, 2020
Motherboard
ASUS VivoBook K571GT Laptop
CPU
Intel® Core™ i7 9750H
Graphics
Intel UHD 630, NVIDIA GeForce GTX 1650
OS X/macOS
11.0 (Beta)
Bootloader
Clover (UEFI)
Mobile Phone
Android
Connect the HDMI.
Right click on Desktop>Display Settings>Advanced Display Settings
From the Display selection, select the HDMI. You'll get some information like below.
View attachment 2581
The above picture is taken from HP Gaming Laptop where the HDMI port is connected to NVIDIA GTX 1050Ti.

thanks, my HDMI port tied to IGPU :
full EFI Folder
which guide should I followed now ? you can see what I did last time in post #1
display.jpg
 

EliteMacx86

Administrator
Staff member
Joined
Jul 22, 2018
Motherboard
GIGABYTE Z370 AROUS GAMING 3
CPU
Intel Core i9 9900K
Graphics
2xAMD RX 580 8GB
OS X/macOS
10.15.x
Bootloader
Clover (UEFI)
Mac
MacBook Pro
Mobile Phone
Android, iOS
thanks, my HDMI port tied to IGPU :
full EFI Folder
which guide should I followed now ? you can see what I did last time in post #1
View attachment 2582
The next step is to patch the framebuffers to enable HDMI port.

Here are few issues.
  • The ACPI is not patched as per the guide.
  • The config.plist is not as per the guide.
  • There are duplicate drivers. The drivers directory is not as per the guide.

Read here:
 

promisedSavior

New member
Joined
Jun 9, 2020
Motherboard
ASUS VivoBook K571GT Laptop
CPU
Intel® Core™ i7 9750H
Graphics
Intel UHD 630, NVIDIA GeForce GTX 1650
OS X/macOS
11.0 (Beta)
Bootloader
Clover (UEFI)
Mobile Phone
Android
The next step is to patch the framebuffers to enable HDMI port.

Here are few issues.
  • The ACPI is not patched as per the guide.
  • The config.plist is not as per the guide.
  • There are duplicate drivers. The drivers directory is not as per the guide.

Read here:
- for ACPI, I just use two patch to make Audio and Battery work. with common patches this two patches didn't work correctly. If I need to do other patches please mention their name.

- config.plist downloaded from RehabMan Intel UHD 630 that I just edited as said in Guide for patch Audio and Battery. I'm sure my config.plist is a clean one. if need to make other common changes in it please tell me. (because I had problems with common changes mentioned in the Guide)

- I have both ApfsDriverLoader.efi and ApfsDriverLoader-64.efi .when I tried to delete ApfsDriverLoader-64.efi system didn't boot any more so placed it there again.

* I tried to patch the framebuffers with Hackintool 3.4.0 but no success. my GPU Device ID : 0x3E9B
PNP Device ID = PCI\VEN_8086&DEV_3E9B&SUBSYS_1A811043&REV_00\3&11583659&0&10
I don't know which platform ID I must use. my laptop has no other display port except 1 HDMI. there is a USB-C port too but I don't know is it counts or not.

default platform ID when open Hackintool = 0x3E9B0000 and the connectors looks like this :
Screen Shot 1399-04-02 at 10.42.57.png


with platform ID = 0x3E9B0009 connectors looks like this :
Screen Shot 1399-04-02 at 10.45.08.png


with platform ID = 0x3E9B0006 connectors looks like this :
Screen Shot 1399-04-02 at 10.46.07.png


with platform ID = 0x3E9B0007 connectors looks like this :
Screen Shot 1399-04-02 at 10.46.44.png


with platform ID = 0x3E9B0000 , 0x3E9B0009 the default laptop screen is identified and two other has valid Index so I changed Type to HDMI and generate patch with below setting, BUT NO SUCCESS. when I plug in HDMI port laptop screen turn black for a second and monitor try to get signal but ....

Patch setting I used for each of top scenario was this :
Screen Shot 1399-04-02 at 10.47.36.png

Screen Shot 1399-04-02 at 10.47.47.png
Screen Shot 1399-04-02 at 10.47.59.png


Lilu.kext 1.4.5 and WhateverGreen.kext 1.4.0 are in clover kext folder.
Current config.plist attached.
 

Attachments

promisedSavior

New member
Joined
Jun 9, 2020
Motherboard
ASUS VivoBook K571GT Laptop
CPU
Intel® Core™ i7 9750H
Graphics
Intel UHD 630, NVIDIA GeForce GTX 1650
OS X/macOS
11.0 (Beta)
Bootloader
Clover (UEFI)
Mobile Phone
Android
I have a question about the buffer patching with Hackintool 3.4.
I'm trying to identify HDMI Index and BusID. as I don't know exact platform ID for my coffee lake Intel UHD 630.
I tried Many scenarios and at last here I am :
Screen Shot 1399-04-09 at 11.08.11.png
Screen Shot 1399-04-09 at 11.09.01.png
Screen Shot 1399-04-09 at 11.08.51.png

Screen Shot 1399-04-09 at 11.10.55.png


I was messing with platform IDs and changing connector options as said in GUIDE : GitHub
it seems everything is ok and OS known Intel UHD 630 completely but when I plug in HDMI cable laptop screen turn black for 1 second and monitor turn on and search for signal but show no signal message. I will be really grateful for a hand here ... :(


download current Clover Folder


what about current Clover folder:
- working bootloader via Clover
- graphics QE/CI working via Clover's config.plist settings
- Audio work perfect even with headphone
- ethernet work perfect
- battery status work perfect
-keyboard backlight control work

- HDMI port not working
- WiFi not working
- brightness controls not working
- certain function keys may not work
- PS2 keyboard/trackpad not working

- etc
 
Last edited: