• Become a Premium Member for $25/year with no ads to improve your community experience.

Problem new hackintosh installation macOS Sonoma

Hi everyone, I'm trying to make my second hackintosh but with poor results, I have an MSI MPG Z490 Gaming Carbon WiFi motherboard, an Intel Core i9 11900KF processor and an AMD RX 6750XT 12 GB PowerColour video card.
I read that the video card needs nootRX to work, initially I get this error, what did I do wrong? what can I do? Could someone help me please? A thousand thanks.

Attachments

  • EFI (2).zip
    6.8 MB · Views: 0
  • image.jpg
    image.jpg
    305.9 KB · Views: 0

Monterey on HP Compaq Elite 8300 All-In-One

If it's correct, I'll stay here with all my problems : less hassle to follow one thread at a time.

About audio : the problem is "not easy to understand" : on my picture, I don't understand what do I need to do with these "0x100102" and "0x100103". Should I put these somewhere ?

Ok, "try one layout ID at once" => though all are needed ! Lol !
Will follow your advice, "12" first, and if no avail, will use "13" instead. Thank you ! Really appreciated :)

EDIT : I've have Hackintool 3.8.7.
- see nothing in audio peripherals (tried 12 & 13 so far)
- see "Intel HD graphics 4000 / 0x166000A /1 (model/framebuffer/port)
- see "unknown display/0x756E6B6E/0x0717/0x0000 (name/vendor ID/product ID/serial number)

I'm not sure, but I think framebuffer has a a wrong value, and maybe that causes Monterey shows only 1280x1024. Can you give me an advice, please ?

Monterey on HP Compaq Elite 8300 All-In-One

I even don't understand if I must open 2 threads, as I have trouble with audio & boot-without-usb. :/
Well, you can open a separate thread for each of the issue you have or can create a single thread regarding a specific system, where all the issues can be covered at one place. Either works.

Anyway, after some thinking, I found the codec I need : see picture.
Following the video tutorial, I added "alcid=3, 12, 13, 33, 84" in the NVRAM section as described.
But still no sound :(
Well, that's wrong. You had all the layout IDs injected. Try 12 or 13. One Layout ID at once, not all of them. xD

Monterey on HP Compaq Elite 8300 All-In-One

have no audio, because at the time I began, I'd no clue about which driver I should use, as the "soundcard" is : IDT 92HD91BXX.
After some digging, I found that this is supported by AppleALC.
But I don't understand how to do this : what should I use ?
Read here:

Another thing to fix : ability to remove USB boot stick and have Monterey booting from hard disk. Looks like I will spent many hours in digging & reading !
Read here:

Error booting Sonoma install - Dell Optiplex 5055 Ryzen 2400G

I found this https://github.com/unitedastronomer/AppleBCM57XXEthernet

Ethernet (Internet) is working I can ping local ip and Internet ip.

But the latency is too high I have 1000MS when I ping an internet IP on this computer.

I can't install macOS ventura I got an error "The recovery server could not be contacted"

View attachment 7348

View attachment 7349
Try NVRAM reset and then check. If the error persists, change the DNS.

I can´t boot on the efi partition on the ssd

Hello, I found a problem with mounting the EFI partition. I use Open Core Configurator for this. I can mount the EFI partition, but if I move the EFI file from the USB to the disk and then remove the USB stick from the computer, I can't boot into macOS after rebooting, and I'm booting to the correct SSD! I always have to boot to USB in order to then be able to boot to the SSD and I don't think that's that nice, below are my specs from the PC:

OPEN CORE 0.9.8/0.9.9 OPENCORE 0.9.8/0.9.9 one of the two
FUJITSU Desktop ESPRIMO P556/E85+
Intel core i5 6500
8GB DDR4 RAM
GT 1030 from Nvidia
mainboard is from FUJITSU
SSD is the Toshiba TR200 256GB

I thank you in advance for the help ;)
Assuming the System is in UEFI boot mode set in BIOS, you can actually create a Boot entry in the BIOS. Also, if Windows is installed, make sure to set the macOS Drive as a first boot device priority in BIOS.

I can´t boot on the efi partition on the ssd

Hello, I found a problem with mounting the EFI partition. I use Open Core Configurator for this. I can mount the EFI partition, but if I move the EFI file from the USB to the disk and then remove the USB stick from the computer, I can't boot into macOS after rebooting, and I'm booting to the correct SSD! I always have to boot to USB in order to then be able to boot to the SSD and I don't think that's that nice, below are my specs from the PC:

OPEN CORE 0.9.8/0.9.9 OPENCORE 0.9.8/0.9.9 one of the two
FUJITSU Desktop ESPRIMO P556/E85+
Intel core i5 6500
8GB DDR4 RAM
GT 1030 from Nvidia
mainboard is from FUJITSU
SSD is the Toshiba TR200 256GB

I thank you in advance for the help ;)