SOLVED Hackintosh Lenovo Thinkpad P15 boot problems..

[rforberger]

Hi,

I want to hackintosh my Thinkpad P15.

I tried to install MacOS Ventura using OpenCore but I am facing some problems.

I cannot boot MacOS from an NVMe disk partition, I am using a slightly modified config.plist from https://github.com/ivan19871002/Thinkpad-P15V-Gen1-Hackintosh.

This guy has successfully hackintoshed a Thinkpad P15V, I have a sightly different model.

But my MacOS won't boot. I don't know how to add debugging of kernel message to a log file, so I only have a short log file.

I am attaching it.

I am also attaching my config.plist.

I am stuck. Opencore boots but after some MacOS Kernel messages, the maschine reboots.

I am using Opencore 0.8.8 and freshly downloaded the Kexts and drivers.

Could you help me and direct me in the right direction?

Thank you in advance.

Best regards,

Ronny

 

[EliteMacx86]

Hi,

I want to hackintosh my Thinkpad P15.

I tried to install MacOS Ventura using OpenCore but I am facing some problems.

I cannot boot MacOS from an NVMe disk partition, I am using a slightly modified config.plist from https://github.com/ivan19871002/Thinkpad-P15V-Gen1-Hackintosh.

This guy has successfully hackintoshed a Thinkpad P15V, I have a sightly different model.

But my MacOS won't boot. I don't know how to add debugging of kernel message to a log file, so I only have a short log file.

I am attaching it.

I am also attaching my config.plist.

I am stuck. Opencore boots but after some MacOS Kernel messages, the maschine reboots.

I am using Opencore 0.8.8 and freshly downloaded the Kexts and drivers.

Could you help me and direct me in the right direction?

Thank you in advance.

Best regards,

Ronny

No PR files attached.

Provide the PR files as described in the FAQ:

READ FIRST! macOS/OS X Frequent Questions

macOS/OS X Frequent Questions - FAQ Before posting your queries, several common questions have been already answered and some exist in the sticky threads in the dedicated support forum. Read this post before you start your journey with macOS/OS X and before posting your doubts and queries...

elitemacx86.com

 

[rforberger]

Hi,

sorry, I am attaching the PR files now. Unfortunately I can't attach the Kexts as the zip file gets too big for upload.

Bios Settings:

• Config network: All Disabled
• Config Display: Thinkpad LCD / total graphics memory 256M / Disabled
• Config Thunderbot 3: Thunderbot BIOS Assist Mode Off / security Level Display port and usb / Thunderbolt device Disabled
• Config Storage mode: AHCI
• Security Fingerprint: Predesktop Authentication Off / Security Mode normal
• Security Virtualization: Kernal DAM Protection Off / IVT ON/ VT-d ON / Enhanced Windows Bionmetric Security Off
• Security Internal Device Acess: All Off
• Boot mode: UEFI
• Security Secure Boot Off
• Security Intel SGX : Disabled
• Security Device Guard: Off

 

[EliteMacx86]

sorry, I am attaching the PR files now. Unfortunately I can't attach the Kexts as the zip file gets too big for upload.

You can use external link.

Regarding the BIOS Settings, screenshot is preferred.

Seems like you're using old OpenCore version. If not, the Bootstrap directory must be removed.

There are several duplicate SSDTs, although they have not been added, but is recommended to have less clutter.

Overall, the configuration you have is not as per the guide. You should start from scratch.

Read here:

GUIDE - How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide

How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is intended for those who wish to use OpenCore as a Bootloader and it covers a...

elitemacx86.com

 

[Malik]

Salut,

Je veux hackintosh mon Thinkpad P15.

J'ai essayé d'installer MacOS Ventura en utilisant OpenCore mais je rencontre quelques problèmes.

Je ne peux pas démarrer MacOS à partir d'une partition de disque NVMe, j'utilise un config.plist légèrement modifié de https://github.com/ivan19871002/Thinkpad-P15V-Gen1-Hackintosh .

Ce gars a réussi à pirater un Thinkpad P15V, j'ai un modèle légèrement différent.

Mais mon MacOS ne démarre pas. Je ne sais pas comment ajouter le débogage du message du noyau à un fichier journal, donc je n'ai qu'un court fichier journal.

je le joins.

Je joins également mon config.plist.

Je suis coincé. Opencore démarre mais après quelques messages du noyau MacOS, la machine redémarre.

J'utilise Opencore 0.8.8 et j'ai récemment téléchargé les Kexts et les pilotes.

Pourriez-vous m'aider et m'orienter dans la bonne direction ?

Merci d'avance.

Cordialement,

Ronny

le fichier ACPI n'est pas bon du tout donc a revoir pas mal, trop de SSDT qui ne fonctionnera pas mais peut empêcher la séquence de démarrage et créer des boucles a redémarrage de boucle

 

[rforberger]

OK, I tried to start over using the Guide.

But where do I get the file

• SSDT-RHUB-Reset.aml

from?

SSDTTime can only create SSDT-RHUB/SSDT-USB-Reset.aml.

Thanks.

 

[EliteMacx86]

OK, I tried to start over using the Guide.

But where do I get the file

• SSDT-RHUB-Reset.aml

from?

SSDTTime can only create SSDT-RHUB/SSDT-USB-Reset.aml.

Thanks.

It's a part of USB Mapping, which is a post install task.

See STEP #3:

GUIDE - How to Map your USB Ports on macOS

How to Map your USB Ports on macOS An EliteMacx86 Exclusive Guide - This guide covers the mapping of USB Ports on macOS. By following this guide, you'll be able to map your USB ports and can also achieve a proper speed for your USB ports. I. Overview Often, the USB ports are not well...

elitemacx86.com

 

[Malik]

SSDTs: The easy way | Getting Started With ACPI

Fixing RHUB: SSDTTime | Getting Started With ACPI

 

[rforberger]

Hi,

I have now followed the Guide and OpenCore documentation, but I still can't boot the Ventura installer.

Here is my current EFI folder: https://github.com/rforberger/EFI-OpenCore-Thinkpad-P15

I get errors like vm_shared_region_start_address: failed. Apples code is here: https://opensource.apple.com/source/xnu/xnu-4570.1.46/osfmk/vm/vm_shared_region.c.auto.html

Any ideas what could be wrong?

Best regards,

Ronny

 

[EliteMacx86]

Hi,

I have now followed the Guide and OpenCore documentation, but I still can't boot the Ventura installer.

Here is my current EFI folder: https://github.com/rforberger/EFI-OpenCore-Thinkpad-P15

I get errors like vm_shared_region_start_address: failed. Apples code is here: https://opensource.apple.com/source/xnu/xnu-4570.1.46/osfmk/vm/vm_shared_region.c.auto.html

Any ideas what could be wrong?

Best regards,

Ronny

Your configuration is still not as per the guide.

You should start here:

GUIDE - How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide

How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is intended for those who wish to use OpenCore as a Bootloader and it covers a...

elitemacx86.com